Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - MHassan

Pages: [1] 2 3 4 5
1
MP Server / ACIF FileName Index
« on: March 26, 2023, 05:05:40 AM »
Hello, anyone have an idea if i can index from filename with ACIF Indexer as I am indexing from filename using pdf indexer with indexmode=metadata and it index successfully but on the other hand when i try to do this with ACIF CMOD failed with APK402S
THE PARAMETER parameter IS INVALID. A parameter that is not valid for ACIF was specified.

2
Report Indexing / CodePage Issue Line Data
« on: March 07, 2023, 06:48:16 AM »
Hello ,

I have an issue When i try to index file with ACIF Line Data that is generated with windows code page (1256) to make the Arabic appear in the report after indexing , CMOD index the file and uploaded it successfully but when i search for a specific index the index value is reversed , so when i write my search criteria i should write the index value from right to left to retrieve what i am looking for , anyone have idea why is this happening or how can i return the index value as it is in the report from left to write.

As you can see the index value of report the value is 2060 218
When I set my codepage 1256 the value is reversed in CMOD client when I search for the report & reversed in document hitlist to 218 2060

3
MP Server / Error loading pdf
« on: September 12, 2022, 04:32:55 AM »
Hello ,

When I try to load a pdf report using pdf indexer in automatic load not with manual loading , CMOD return the below error

 ARS4312I Loading started, --UNKNOWN-- bytes to process
 ARS1140I Resource C:\load\IDO.IDO.IDO.pdf.res matches the resource >6-1-0<
 ARS1197E Invalid generic index file format sequence
 ARS1146I Loaded 0 rows into the database
 ARS4311E Loading failed
 ARS4324E File >E:\ondemand\arsload\IDO.IDO.IDO.pdf< renamed to >E:\ondemand\arsload\IDO.IDO.IDO.pdf.Failed<.  Correct problems and resubmit file.
 ARS4318E Processing failed for file >E:\ondemand\arsload\IDO.IDO.IDO.pdf<

and when i changed the RESTYPE in the indexer parameter file from RESTYPE=ALL to RESTYPE=NONE
Load is worked file, knowing the it is working on another environment for the same report with RESTYPE=ALL and automatic loading is working fine , so any one have an idea why this happen on this environment

4
MP Server / Re: Audit , SSL/TLS
« on: June 08, 2022, 09:06:05 AM »
In response to your question about SSL/TLS versions, there are some undocumented parameters that you can add to ars.ini in order to control how CMOD & SSL work together:

https://cmod.wiki/index.php?title=ars.ini#Unlisted_CMOD_Configuration_Parameters

-JD.

Hello JD,

Thank you so much , This what exactly what I were searching for.

5
MP Server / Re: Audit , SSL/TLS
« on: June 08, 2022, 05:44:36 AM »
As far as I know, there is no such feature, but it's possible to build something that does this.

This would probably be a good candidate for an Enhancement Request.

-JD.

Thank you JD for you reply ,

Regarding the second question do you have any information about it , is CMOD V10.5 support TLSV1.2 or higher as There is no record in the documentation of the CMOD that state the version of TLS version , it only contains documentation of how to configure CMOD with TLS/SSL

6
MP Server / Re: Audit , SSL/TLS
« on: June 08, 2022, 03:07:16 AM »
As long as you have maximal logging enabled, the System Log is your Audit Trail.

Unless you have some specific need that you haven't told us about...

-JD.

What the customer need is to see everything done on specific report without going to system log and search for message number and extract it in csv as this is a long process for him , so is there any feature like this ?

7
MP Server / Re: Audit , SSL/TLS
« on: June 08, 2022, 03:04:30 AM »
Hello ,

1-is CMOD V10.5 Multiplatform containing audit trail feature ?
If yes how can I enable it , or how to configure it

2- What's the version of TLS/SSL is supported from the CMOD V10.5 ?

What exactly do you mean by audit trail?


What I mean for example in FileNet I can set audit on specific Document Class , and extract the report and it describe everything that happened on this class
So what I am asking about is there any feature that is same as this ?

8
MP Server / Audit , SSL/TLS
« on: June 07, 2022, 05:19:07 AM »
Hello ,

1-is CMOD V10.5 Multiplatform containing audit trail feature ?
If yes how can I enable it , or how to configure it

2- What's the version of TLS/SSL is supported from the CMOD V10.5 ?

9
MP Server / Re: Field maximum length issue
« on: June 07, 2022, 04:47:24 AM »
Reach out to me if you haven't solved this problem yet.

-Rob

Hello Rob,
I have still same issue , do you have any solution for this

10
Report Indexing / Re: PDF Index from FileName
« on: March 22, 2022, 10:09:11 AM »
Hello Greg,

Yes I  tried -b "1,BranchCode" but still the same error ARS4910E Incomplete indexing parameters supplied
I renamed my pdf file to FileName.FileName.001.pdf  (FileName : is the name of my application group & application )
should I add anything in my indexer information tab in the application because I think this error is appearing because that I am leaving my indexer information tab blank without anything ?

11
Report Indexing / PDF Index from FileName
« on: March 21, 2022, 12:21:12 PM »
Hello,

I am trying to index my fields from the filename so I have done the below but I am getting an error :

1- I created an application group and defined 1 parameter BranchCode
2-I Created an application with Datatype : PDF & Indexer : PDF but without provide any indexer information included,
3-I provide in my configurator in arsload service parameter -b 1,BranchCode -B "AG.APP.1FLD.EXT"
4- I renamed my pdf file with ApplicationgroupName.ApplicationName.001.PDF & put it into the arsload folder for automatic loading
So what i was expecting that 001 is indexed from file name and stored in the field BranchCode which i created in my application

But I am still getting an error  ARS4910E Incomplete indexing parameters supplied

So anyone have idea why i am getting this error ?

12
MP Server / Field maximum length issue
« on: February 03, 2022, 02:40:14 AM »
Hello,

I have an issue that My Field(Customer Name) its maximum length is 160 , but there are reports that Customer Name is coming with 164 character so CMOD fails to extract this value and failed to load the report
I am using PDF Indexer
So anyone have an idea how to handle this issue without deleting the application group , by increasing length of field or by applying regular expression to trim the value when it reach 160 character and extract this value

13
MP Server / os/400 indexer
« on: December 01, 2021, 08:23:40 AM »
Hello ,
Can anyone help me by answering this question please , is os/400 Indexer is working with CMOD multiplatform , My case is that i was having Content Ondemand on iSeries then it is migrated to CMOD multiplatform , and there are reports that will be ongoing from the migrated reports but the Indexer type of ongoing reports is 400 & Datatype is SCS& AFP so is it applicable to index the reports and load reports that will be ongoing on the multiplatform environment.

14
MP Server / XML Indexer
« on: September 29, 2021, 08:29:58 AM »
Hello,

I am new to use XML Indexer I have 2 questions , I hope someone to answer me this question:

1-In XML indexer after I uploaded the XML file with .RES zip file first time , I try to load another XML file to the same application but without .RES zip file , so when i try to view the document of the second upload the format changes , So my question is should everytime i upload XML file to an application should i upload .RES zip file that contains my logos and .css and .xsl file ? , or is there any work around that i should do to only upload .RES zip file one time , and all the upload files after take the same format ?

2-In XML indexer after i uploaded the XML file with .RES zip file , Then after awhile I modified the format(.css or logo) in .RES zip file , so I want the old uploaded reports take the same format of the new uploaded reports

15
MP Server / Re: IBM Cloud object storage issue in loading
« on: September 16, 2021, 06:41:09 AM »
Hello,

I am configuring IBM cloud object storage with AIX CMOD server, i configured the ars.cfg by adding the paramters
ARS_ICOS_CONFIG_FILE=/opt/IBM/ondemand/V10.5/config/ars.icos
ARS_ICOS_CONFIG_DIR=/opt/IBM/ondemand/V10.5/config

And i configured ars.icos.smp in config directory on AIX and specify Server IP and Enable SSL , SSL is enabled due to the customer said that SSL is enabled

And configured the Storage Set in CMOD by creating storage node and specify the vault name and user name and password ,

after i trying to load documents to a specific application the error LOG say :

ARS115E : Unable to store the object

I cannot trace the error as it is general error , so anyone have an idea about this issue and can help me
or is there any missing configuration that I should add related to the configuration or is there any configuration that need to be done due to the enablement of SSL

What does your ars.icos look like? Also, have you tried a system trace? I've seen with working with ICOS, that this can be helpful when using ALL=15 in trace.settings.


Hello jsquizz ,

What do you mean by What does your ars.icos look like ? And i already set trace_levels=all=15 in trace.settings file , The trace file that generated is encrypted file , What do you mean by system trace also ?

What settings are you using in ars.icos. It's been a while since I did this but I remember seeing this issue when there was an issue with the bucket/server name (i forget the term..)

Also, as far as the trace, i do this

run arstfmt -i <tracefile> -o readable.trace

issue more readable.trace | grep ERR   <-- might give more information about the error.


Hello TRDFan,

my ars.icos.smp file look like the below :

ARS_ICOS_SERVER=ip address (IP Address is valid or should i add hostname )
ARS_ICOS_USE_SSL=1
ARS_ICOS_CONNECT_TIMEOUT=60 SECONDS




I ran the command

run arstfmt -i ARCHIVE.trace.log -o readable.trace

But when i open the file i try to find an error but no luck , so do you have any recommendations for what to search in this file
and There is something that i noticed in the trace file that there parameter

parm_ptr=host:VaultName.IPAddress
web_url=https:///VaultName.IpAddress
Basic_url=VaultName.IpAddress


Pages: [1] 2 3 4 5