Messages

46

MP Server / Question about unloading statements in CMOD 9.5

« on: February 21, 2017, 08:45:54 PM »

Is there a way to unload a statement from CMOD that is part of a larger load file without unloading all statements in that load file?  Example: I have a load file with 100 statements in it numbered with IDs 1 to 100.  Is there a way for me to JUST unload the statement 85 from that load file without unloading anything else in that load file?

47

MP Server / ODF 9.5 on AIX 7.1

« on: February 21, 2017, 08:42:11 PM »

I have a distribution set up to query PDF load files for 200+ specific accounts.

My distribution writes the distribution to a file location (/odf/distribution/out) on AIX.

My load files typically contain many (typically hundreds of) statements and so my query may result in many statements meeting my distribution criteria and being put into a distribution file for a specific load file.

Out of the box ODF will create ONE distribution file and include in it every statement it finds that meets my distribution criteria in each load file.  Ex. if 100 statements in the load file meet my criteria, ODF will put those 100 statements in a single file in the location I specify.

This is not the behavior that I want.  I want ODF to create a separate PDF file for every statement that it finds that meet my distribution criteria. Ex. if 100 statements were found in my load file, I want ODF to create 100 individual PDF distribution files with 1 statement in each.

How do I configure ODF to do this without creating 100 distributions in ODF Administrator?

48

MP Server / Re: Helpl Loading PDF Files

« on: February 21, 2017, 08:25:47 PM »

Thanks for the reply and guidance.

Yes we received the files as individual PDF statement files - 1 statement for each pdf file. 

We're able to load about 3,000/hour on an AIX 7.1 box running CMOD 9.5 and DB210.5. 

It's not great, but at this point, I'm going to let it run it's course.

49

MP Server / Helpl Loading PDF Files

« on: February 16, 2017, 05:07:09 PM »

I'm attempting to load 500,000 individual PDF files that a vendor has sent me and I need to do so by Monday, 2/20 COB.  Each of these files is a fairly small and single PDF statement.  This of course is not the best way to load files to CMOD - larger files with many statements would be optimal, but it is what it is.  Is there a way to streamline the load process to create the highest load speed possible.  I'm running on AIX, CMOD 9.5 MP and PDF Indexer 9.5.

50

MP Server / Cannot "Vary Online" TSM Volume Groups

« on: October 31, 2016, 10:06:32 AM »

For some reason we've encountered that our volume groups for CMOD are all offline.

We found this from TSM dsmadmc admin console: q vol   

And when we issue the command to vary online the volume group from the dsmadmc console we get the following error message:

10/26/16   13:00:56  ANR1314E Vary-on failed for disk volume
                      /archive01/7year/disk2 - reduced capacity (was 128000000
                      blocks, now 73728 blocks.

Of note, we can now no longer create a volume group > 2GB and can vary that online immediately but if a day elapses cannot vary that online either ??

51

MP Server / Re: When to CMOD and When to FileNet - Documentation Request

« on: June 01, 2016, 11:16:12 AM »

We'll use Datacap to scan them and ensure that all index values are captured.

52

MP Server / Re: When to CMOD and When to FileNet - Documentation Request

« on: June 01, 2016, 07:55:53 AM »

Thanks for the reply Justin.

So where you're capturing a lot of documents with different index values and not "lots of the same" isn't necessarily a good use case is it? 

53

MP Server / When to CMOD and When to FileNet - Documentation Request

« on: May 31, 2016, 12:09:02 PM »

So we have a lot of different use cases in our organization where we need to determine whether we use CMOD or FileNet to store our ECM content.

1. Have you all seen and can you point me to documents that provide some good guidance on determining when to use CMOD and when to use FileNet - especially if you have a use case where you're doing store and search only and where both solutions could be viable.  Ex. We use Datacap to scan and store single mortgage documents that are NOT part of a workflow and release those to FileNet.  Theoretically, I could use Datacap to scan those and release them to CMOD.

2. Also, can you store any document type in CMOD (Excel, Word, etc.) or is there a specific document types that can be stored (AFP, PDF, TIFF, etc.)?

Thanks a bunch!

54

MP Server / Re: Cloning Environments (AIX 7.1 LPAR/ CMOD 9.5.0.5 / DB2 10.5 /TSM 7.1)

« on: March 31, 2016, 08:51:41 AM »

Appreciate you JD and I think your first statement is the best of the reply - could use the practice and that's likely how I'll roll with this one 

55

MP Server / Cloning Environments (AIX 7.1 LPAR/ CMOD 9.5.0.5 / DB2 10.5 /TSM 7.1)

« on: March 30, 2016, 02:53:52 PM »

I'm running CMOD 9.5.0.5 with DB2 10.5 on AIX 7.1 with TSM 7.1 and need to stand up a development environment for testing.

Has anyone ever tried cloning an environment including servers and application and then just renaming and repointing everything?

Just wondered if this was possible in lieu of installing and configuring everything from scratch.

56

MP Server / Re: Upgraded CMOD/TSM from 8.5/6.2 to 9.5/7.1 - Can't get them to talk

« on: February 18, 2016, 12:44:30 PM »

So IBM is going to have a patch out and their recommendation is to use that.

I will try to upgrade my TSM client and see if that doesn't resolve the problem.

57

MP Server / Re: Upgraded CMOD/TSM from 8.5/6.2 to 9.5/7.1 - Can't get them to talk

« on: February 18, 2016, 11:23:42 AM »

Just to make sure I'm entering this correctly, please see the attached StorageSet.png screenprint to see my CMOD configuration.

And see my tsm dsmc interface screenprint command and results.

58

MP Server / Re: Upgraded CMOD/TSM from 8.5/6.2 to 9.5/7.1 - Can't get them to talk

« on: February 18, 2016, 11:12:42 AM »

This last command worked and the result was that TSM showed me all my filespace types and names.

59

MP Server / Re: Upgraded CMOD/TSM from 8.5/6.2 to 9.5/7.1 - Can't get them to talk

« on: February 18, 2016, 09:25:09 AM »

Also our 819 value was provided by a vendor when we first installed CMOD at version 8.5.0.5.

So I should change that value to 923?

60

MP Server / Re: Upgraded CMOD/TSM from 8.5/6.2 to 9.5/7.1 - Can't get them to talk

« on: February 18, 2016, 09:23:43 AM »

The account doesn't show locked out when issuing a "q node" command in TSM dsmadmc.

Also, i can login to the interactive client.

My TSM Client version is 7.1.1.100.

The issue seems to be that CMOD is using a different userid/password combination when trying to access TSM than when I do it via interactive session (dsmadmc).

Is there a userid/psswd stash somewhere that CMOD is passing to TSM?